Fujino Line Co. Tenkara Japan-style Standard 3.6m Tapered Line

I don't fish dry flies very often, but occasionally I will come across a pod of rising trout where I will want to present a fly to them so that it will either be on the surface film or just riding in it. If the fly has any amount of wind resistance I find my presentation with a level line somewhat lacking.

I've been looking at floating lines which might deliver a dry fly with a subtle presentation, but I haven't found one that I wanted to buy until recently. I've used some PVC lines in the past, mainly to teach youngsters how to cast, and they work really well for that, but personally I'm not into PVC lines (made specifically for tenkara or repurposed fly fishing lines). I also don't care for furled lines, never have. I know they work well but they are so heavy and since I fish upstream they are hard to hold off the water.

I do have a nylon twisted line that is made in Japan (Nissin PALS Orange) that is pretty great because it's small in diameter and quite light. I'm able to keep it off the water pretty easily. It transfers the energy from the rod to the fly well and I think it's about as good as it gets for composite lines.

Recently I did buy a line from Japan that I'm pretty impressed with. It is a coated line but it has a very small diameter and is tapered. It has a nylon core for rigidity and energy transfer. It is made specifically for tenkara and although coated is light enough to hold off the water easily.

This line is coated with polyurethane rather than the usual polyvinyl chloride, PVC.  Polyurethane combines the best properties of plastic and rubber. It offers high elongation values (stretchability) like rubber and abrasion resistance that's superior to PVC. Polyurethane is naturally flexible and does not use additives to retain its flexural properties. Some European fly line companies have used polyurethane for years, while US fly line manufacturers generally prefer PVC.

This new line I bought is the Fujino Line Tenkara Japan-style Standard 3.6m Tapered Line. It is orange in color, but is less bright than the Nissin PALS Orange. It has a girth knot loop for attachment to the rod's lilian. With my digital micrometer, I measure the line diameter at 0.58 mm near the butt. It then tapers to 0.42 mm at the tip. For comparison, I measure a Nissin PALS #3.5 fluorocarbon tenkara level line at 0.32 mm.

Top to bottom: Fujino line near butt, #3.5 PALS level line.

The 360 cm line length is for the coated portion of the line, but the nylon core extends another 60 cm beyond where the polyurethane stops. I cut mine back to 26 cm then added a tippet ring. For reference, the nylon core is 0.2 mm in diameter.

The Fujino tapered line casts very nicely with both full flex and tip flex rods. It has excellent energy transfer and lays the tippet out straight. It isn't as efficient in energy transfer as a furled, twisted or PVC coated line. But then again, it's not nearly as heavy either.

I'm pleased with the Fujino Line Tenkara Japan-style Standard 3.6m Tapered Line and I look forward to using it with 6X tippet and #18-20 BWO emergers, as soon as my streams thaw enough to let Baetis mayflies hatch!

Trying Something New

This winter has been a good snow year. I've got three feet of snow in the front yard and six feet in the back. All of my small streams are deeply covered. I could fish the Henry's Fork and the main Snake below some dams, but I'm just not into it this winter. Let's see... right now it's 15 degrees F outside. I think I'll just tie a few flies.

This year I'll try some different kind of kebari. I've never tied or fished kebari with a loop attachment instead of a hook eye. Here is what I have tied recently:

I'll see how they cast, drift and fish. Maybe I'll even try some fly manipulation as well. I'm not really into that sort of thing, but what the heck, it's worth a try. Isn't it?

The long (but not short) of it.

In my last post, I made the following statement: "One concept that is often promoted in the tenkara community is simplicity. Simplicity often tends to lead some anglers to minimalism. In adopting minimalism, some anglers lean towards very compact rods, thinking compact is more minimal. I can see where the backpacking tenkara angler would want a compact rod in their kit, but I bet most tenkara anglers in the US don't have to hike very far to get to the waters they fish. The point I'm getting at is that although most tenkara rods are rather short when they are nested, and sure, this is nice and convenient, a compact rod is usually not required on most waters." Now that it's been said again, let me explain some of my thoughts.

Over the past many years I've had a few rods that have long nested lengths. Granted, I don't hike with them, (well, not very far at least) but for the most part I think they are great rods and have been overlooked by many due to their long lengths when nested.

What do I like about long nested rods? I like their flex action. I find these rods to be very smooth in action. Their bend profiles tend to be without flat spots (which often come from segment joints) and the transfer of energy is very efficient. Because of this they tend to cast beautifully.

Do they cast better than a rods that nest into a more compact length (in other words, ones that have more sections and joints)? That depends on your perspective. Personally, overall I think they do. I do have some rods that collapse into shorter lengths that cast really well, like the Oni Type-I, but long nesting rods are just plain smooth. It's really something you have to experience.

The long collapsed rods that I have used are the Shimano Mainstream ZE, Nissin Air Stage Honryu 380, Shimano Honryu 44NP, and the Dawia Master L LL36. Some may also include the Shimano Keiryu Tenkara 34-38 ZL, but it isn't as long when nested as these rods.

Left to right: Nissin Air Stage Honryu 380, Daiwa Master L LL36, Shimano Mainstream ZE. Also included for length comparison are the Discover Tenkara Karasu and the Tenryu Furaibo TF39TA. 

Are these rods perfect? No, of course not. I didn't spiritually connect with the 34-38 ZL so I did not keep it. The 44NP felt too tip heavy for my liking, so it had to go. The Mainstream ZE is a classic and so different from Dr. Ishagaki's other rods, and I like the 400 cm length but I'm not a fan of it's swing weight when it's extended to 450 cm. I don't like the AS Honryu 380's handle shape, so I modified it. However, the Daiwa Master L LL36 is near perfect for me.

Don't let the collapsed length of these rods put you off. If you ever get a chance to cast one of these special rods take the opportunity. Even if you don't end up purchasing one, you will be all the more educated for doing so. I believe you will feel what I'm talking about, and may even be able to overlook their unconventional length when nested.

Daiwa Master Tenkara L LL36 - review

I recently had the opportunity to test and cast the new Daiwa Master Tenkara L LL36, and boy, am I glad I did! I've always liked Daiwa tenkara rods, at least the Enshou and Expert class rods, but the Master L LL36 is in a class all it's own. This is one amazing rod.

One concept that is often promoted in the tenkara community is simplicity. Simplicity often tends to lead some anglers to minimalism. In adopting minimalism, some anglers lean towards very compact rods, thinking compact is more minimal. I can see where the backpacking tenkara angler would want a compact rod in their kit, but I bet most tenkara anglers in the US don't have to hike very far to get to the waters they fish. The point I'm getting at is that although most tenkara rods are rather short when they are nested, and sure, this is nice and convenient, a compact rod is usually not required on most waters. The Daiwa Master Tenkara L LL36 is not a compact rod, but like I just said, most of us don't need an uber compact rod. If you decide not to try this rod just because it isn't compact when nested, then well my friend, you are just going to miss out.

So, let's start.

The Daiwa Master Tenkara L LL36 comes with the standard plastic carton that is typical for most Japanese tenkara rods. It also comes with a rod sleeve, but not a typical one. The Daiwa sleeve is slightly padded, and opens and closes with a zipper at it's top.

It's not a compact rod. Left to right: Daiwa Master L LL36, Daiwa Expert L LL36, DT Karasu 360.

The overall coloration of the rod looks at first to be black, but when you get the rod in the sunlight it's actually dark green. The finish is glossy. The rod designation area is accented with prismatic paint that looks green in some light and blue/purple in other light. It's pretty cool. This accent paint is also on the tip of the other segments, except the tip segment. Near the winding check is a ring of crackle paint done in silver and green. I'm not so taken with this accent, but it isn't too bad either.

The joints of each segment have Daiwa's propriety V-Joint. There are rings machined into the section ends help to allow the joint to bend smoothly, while also dramatically reducing the likelihood of stuck joints. I'm a big fan of these, and wish other rods had them.

The handle is high quality cork that is gourd or camel shaped. It is 32 cm long. There is a small ring of cork composite at the butt of the handle. The diameter and shape of the handle is very comfortable. In fact, Daiwa Enshou, Expert, and now, Master rods have a handle that is my favorite length, shape and composition of any tenkara rod that I've used.

The tip plug is wood with a fluted rubber post. It is really tight fitting and is actually hard to get all the way back into the rod after it's removed. But this is not an issue for me, as I remove all my rod's tip plugs and use a Fuji universal rod cap instead. A KTC-12 works great for this rod. The butt cap is gold anodized metal, has a coin slot, but no air hole. It doesn't really need the air hole since this rod only has 4 segments to collapse.

It's a very tight fit. I can't get it back in. 

The lilian is like other Daiwa rods in that it is relatively short and thick. It would be difficult to tie a stopper knot in it, but since I don't use a stopper knot on my tenkara rods (I do on some of my kieryu rods) it's not an issue for me. The lilian is brown instead of the ubiquitous red. It is attached to the tip section with a perfectly executed micro swivel. The rod can be completely disassembled for drying and cleaning.

Lilian diameter. Top to bottom: Oni Type-I, Nissin Air Stage Honryu 380, Daiwa Master L LL36.

Here are my measurements:

Fully extended: 359 cm
Fully nested (with tip cap): 101 cm
Weight (without tip cap): 76.7 g
CCS/RFI: 15 pennies/4.2

RFI comparison chart. Click to enlarge. 

Casting the Daiwa Master L LL36 is amazing. This is a full flex rod, but it doesn't feel like the Expert L LL36, which is also a full flex rod. Here's what Chris Stewart says about this rod's feel: "The Daiwa Master Tenkara L LL36 is a penny firmer than the Expert L LL36, and a penny and a half firmer than the Expert LL36. That's not the only difference, though. The Master L LL36 is just slightly more full flex. People want to equate full flex with soft, but that is not always the case. The Master is more full flex, but it is also just a little bit stiffer. If you were to cast both rods side by side you could feel it. It feels like a very efficient transfer of the energy from your arm and hand to the rod and line."

The action is full and rich, and feels somewhat similar to another of my favorite rods, the Nissin Air Stage Honryu 380. This might have something to do with the length of each of the rods segments. Both rods have only 4 segments and so when collapsed are long. The Daiwa Master transfers the kinetic energy and momentum of your forearm to the line very efficiently. I use a 14' #2.5 fluorocarbon level line with 3.5 feet of 6X tippet to test rods. To the tippet is attached a dummy #12 thread body futsuu kebari, which provides enough wind resistance to challenge my casting. If the rod I'm testing casts this line without effort, then I know that at least for me, the rod will be a well matched tenkara rod. This rod does this.

The other readily noticeable feature of this rod is how well it dampens. I have fished with rods that dampen well as well as others that claim to dampen well, but this rod really does dampen well. Even I can tell! Linear and rotational dampening is phenomenal!

I haven't fished the rod yet, as all my small streams are frozen over. I'll fish it as soon as I can, though. I was so impressed by the Daiwa Master L LL36 that I bought it.

Conclusion: I really like this rod. Is there anything I don't like about this rod? Yes, three things. First, the tip plug. It's too tight. Second, the crackle paint. It's a little thing, but I don't care for it. And third, it costs too much! Take $100 USD off and maybe it would be OK. Still, that's a lot of money! The long collapsed length doesn't both me at all. After all, I fish my Air Stage Honryu 380 rather frequently and have taken it on some short hikes as well. If I'm going to cross country trek in somewhere I'll take a different rod. But if I feel like fishing a full flex 360 cm tenkara rod, then I'll likely take the Daiwa Master. As I have said before, I'd no more fish with just one rod as I'd fish just one fly. Ah, so many great rods, so little time.

Disclaimer: My opinion regarding this rod is just that, my opinion. Your opinion may differ.  Also, your rod may not have the same length, issues, or functionality as my rod. There are variations between rods, even in the same production run. No description can fully tell you how a rod feels or fishes. For this, you must personally hold, cast, and fish the rod then make up your own mind. 
I have no formal affiliation with TenkaraBum and I purchased the Daiwa Master L LL36 at full price.